This popular rail provides a firm handle just above
the side of the bath, to assist with getting in and out. The handle
is angled inwards to be directly over the bath rim. Available in chromed
steel or epoxy coated and adjustable in height using a pin clip system.
The clamping arms can be adjusted in height and opening width. The
bath rim is protected on both sides by non-slip rubber pads. The base
plate of the rail must be screwed to the floor.
Specifications:
Height of handle 547 to 747mm (21 1/2 to 29 1/2").
Height to rim 350 to 590mm (13 3/4 to 23 1/4").
Length of handle 175mm (7").
Base plate 25 x 265mm (2 x 10 1/2").
Weight 2.6kg.
Maximum user weight 150kg (23 1/2st).
Bath
Tap Rail
No
Image Available.
This
useful rail attaches neatly and simply to standard bath taps. It
will help you to pull yourself forward when standing up in the bath.
Plastic coated steel suitable for long term installation (there
must be a gap of 1” minimum between wall and taps for fitting).
Specifications:
Size 27".
Distance from taps 12".
Bathtub
Grab Rail Padded
These grab bars provide additional
support when getting in and out of the bath or shower. Easy to fit
and remove from the bath, the padding gives extra grip and comfort
to sensitive hands. The angled version positions the bar over the
bath, making it easier to use when lowering into or raising out of
the bath.
Specification:
Height above bath side 267mm (10.5").
Clamp width adjustment 57 to 140mm (21/2 to 51/2").
Weight 2.6kg.
Bed Rail
An ultra sturdy bed grab rail, offering
stability and confidence. The height adjustable frame can be positioned
to suit virtually any divan style bed. Two legs rest on the floor
and the frame is secured into place via three straps, ensuring minimal
movement when in use. The Homecraft Bed Grab Rail is simple to assemble
and fit.
Specification:
Height of handle 850 to 950mm (33 1/2 to 37 1/2") from the floor.
Width of handle at the top 265mm (10 1/2").
Size of under mattress frame 620 x 325mm (24 1/2 x 12 3/4").
Weight 3.4kg.
Maximum user weight 127kg (20st).
Bed
Rail Elland
The Elland bed grab rail has been
designed especially to attach to the framework of metal beds. Can
be fitted to either fixed or profiling beds. Supplied with two heavy-duty
screw clamps that fix to the metalwork of the bed.
